Announcement

Collapse
No announcement yet.

Spark plug cable holder bolt issue

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Spark plug cable holder bolt issue

    Today i had a strange noise in the engine. When looking under the hood, is saw that the spark cable holder was missing a bolt. The bold holds the cable holder in place. The bold has a star shape. My question is van i replace the bold by any type or does anyone know where to get an original one (or part number).


    Verzonden vanaf mijn iPhone met Tapatalk

  • #2
    Well......basic information from you
    but guessing your car is either a 1.8 or a 2.0 turbo petrol?

    Any pics?

    https://insignia-drivers.uk/filedata/fetch?filedataid=7610&sigpic=1

    Comment


    • #3


      In the first picture there is this bold which im missing in the second picture, probably the same type.
      Its a 1.8 from 2010 ST


      Verzonden vanaf mijn iPhone met Tapatalk

      Comment


      • #4
        It's a torx bolt buddy.

        And yes, as long as it's the same thread and same length...it'll be good as new
        https://insignia-drivers.uk/filedata/fetch?filedataid=7610&sigpic=1

        Comment


        • #5
          Thank you rbj for the fast reply, will install a torx bold same length tomorrow. Was more concerned about the material of the bold with engine temperature


          Verzonden vanaf mijn iPhone met Tapatalk

          Comment


          • #6
            As long as it's a steel bolt, it'll be fine buddy

            My Vectra C lost the bolt in the same place and I replaced it with s normal steel bolt
            https://insignia-drivers.uk/filedata/fetch?filedataid=7610&sigpic=1

            Comment

            Working...
            X