Rear view camera install

[davidvilao New Driver Find all posts View Profile Close davidvilao]

Hi!

I've bought an original RVC, I've already activated the RVC on the HMI, but would really appreciate some help with the installation.

Does any of you guys already made this retrofit?

I've attached some photos of the camera.

Thanks!

[plasma Trader Find all posts View Profile Close plasma]

get me some better pictures of the connector and wiring so i can see what wire goes where and i will be able to help out tonight

[davidvilao New Driver Find all posts View Profile Close davidvilao]

Many thanks'

plasma

Trader

Find all posts

View Profile

Close

plasma
Hope these pictures help.

[davidvilao New Driver Find all posts View Profile Close davidvilao]

Hi

plasma

Trader

Find all posts

View Profile

Close

plasma can you help me with this? Thanks

[plasma Trader Find all posts View Profile Close plasma]

Yes for sure, them pictures are fine.. I will be digging out the info you need today..

[davidvilao New Driver Find all posts View Profile Close davidvilao]

Thanks mate

[plasma Trader Find all posts View Profile Close plasma]

this should be it

[davidvilao New Driver Find all posts View Profile Close davidvilao]

Thanks!!

Just one thing, i can't read what's on the top corner of the pic

[Johnnydk Street Racer Find all posts View Profile Close Johnnydk]

Hi!

I've bought an original RVC, I've already activated the RVC on the HMI, but would really appreciate some help with the installation.

Does any of you guys already made this retrofit?

I've attached some photos of the camera.

Thanks!

Use the cable from the Astra, i have done this retro fit https://insignia-drivers.uk/forum/in...-from-an-astra

[davidvilao New Driver Find all posts View Profile Close davidvilao]

I will be looking to install the camera tomorrow, a little help

plasma

Trader

Find all posts

View Profile

Close

plasma .. do I need to run all the wires to the hmi connector? Or i can connect some at the rear of the car?

[plasma Trader Find all posts View Profile Close plasma]

the green white for reverse light power you can pick up on the cable loom in the left hand side cubby hole, the rest i would take to the front

[davidvilao New Driver Find all posts View Profile Close davidvilao]

Will do that. Many thanks!

[davidvilao New Driver Find all posts View Profile Close davidvilao]

Just one last question, is there any diagram for the connections up front? On the HMI itself?

I ran all the cables from the back to the front, except the one connected to the reverse light, but then i'm kinda lost

[davidvilao New Driver Find all posts View Profile Close davidvilao]

plasma

Trader

Find all posts

View Profile

Close

plasma can you help me with this please? Thanks

[plasma Trader Find all posts View Profile Close plasma]

if you do a search on here you'll find somewhere someone has posted up which wires on the hmi you need the video signal.. other than that not sure how much more i can help without doing it.