I have been absent for a while, but did anybody get this working (with Teyes or other?) Still interested to get AA in my Insignia...__PRESENT__PRESENT
Announcement
Collapse
No announcement yet.
Teyes CC3 2K no sound
Collapse
X
-
Originally posted by 3133sor View PostNow I am lost.
Tried to reach that BOSE amp ...
They buried it deep into her a++ (the right buttock) .
As far as I can see - there are only 3 wire pairs coming from the green connector of this amp....
Suppose these are the outputs to RL, RR and Sub speakers. Where are the front spekers outputs?
Cant see good the other connectors.
(Green connector of silverbox has nothing connected to it).
Where are the other (front) speakers connected to?
Anyone has access to some official wiring diagrams of this car ?
Insignia 2014 CT with BOSE amp?
- Likes 1
Comment
-
Originally posted by plasma View Post
Just nose'ing through this thread and thought i'd clear a few points up on this. The HMI has nothing to do with the audio line by data or by low level audio. Purely down to the silverbox. On standard systems all the audio outputs are on the green plug. On the bose it goes along via the MOST network to the amp in the boot and the amp outputs it audio via the green connector PLUS another connector as well. ANY aftermarket unit would have to pick it up the audio from there OR have the silverbox radio reprogrammed to non-bose then and only then can you use the green connector for audio
Tried it today but unfortunately plug a play is still not happening.
Tried the 3 support Watsapp numbers but until today Zero repons, really scandalous.
And it's such a shame because that radio is seriously insanely awesome and fast.
Comment
-
Originally posted by MSTEK View Post
I received this wiring harness with it and it was supposed to be specifically for Bose version (type B).
Tried it today but unfortunately plug a play is still not happening.
Tried the 3 support Watsapp numbers but until today Zero repons, really scandalous.
And it's such a shame because that radio is seriously insanely awesome and fast.
Is there really nobody that knows how to get sound out of the bose system?
Comment
-
​​
So, I had the same issue, it takes some time for the support answers, but they do answer. They just don't know anything about it, and ask questions that don't make sense...
Is there really nobody that knows how to get sound out of the bose system?[/QUOTE]
I'm afraid not, I've decided to convert everything.
Comment
-
Originally posted by MSTEK View PostÃÂâÃÂÃÂÃÂÃÂâÃÂÃÂ
So, I had the same issue, it takes some time for the support answers, but they do answer. They just don't know anything about it, and ask questions that don't make sense...
Is there really nobody that knows how to get sound out of the bose system?
I'm afraid not, I've decided to convert everything.
[/QUOTE]
Cracking bit of work.
you should start a thread of your build.....there's a lot of interest on the forum regarding ice.
Gonna be superb when it's finished
Hats off to you buddy
Comment
-
Originally posted by .R.B.H. View Post
you should start a thread of your build.....there's a lot of interest on the forum regarding ice.
Gonna be superb when it's finished
Hats off to you buddy[/QUOTE]
That's a nice idea though, I'll have to take some more photos. Give me some time. I'm quite busy
- Likes 1
Comment
Comment