register

Announcement

Collapse
No announcement yet.

Corsa VXR Side Repeater Surround Conversion

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Corsa VXR Side Repeater Surround Conversion

    Looks great matt.

  • #2
    8thtriumph, on Oct 1 2010, 02:49 PM, said:I have my set of VXR surrounds ready to go on, so thanks for the guide.

    However what's the best way of getting the model badge off?

    Is it using a hairdryer to heat the badge/adhesive?



    G
    Hot water will do the trick. Then get a credit card behind it or some thread.

    Comment


    • #3
      Many thanks for the guide.



      My VXR surrounds have arrived and it looks like I will have to remove the model badge in order to fit them. I note that this can be done with hot water.

      If however I used a hair dryer to remove the badges would I be able to stick them straight back on again (lower down) or would I have to use some fresh adhesive? If so what?



      Thanks Dave

      Comment


      • #4
        daveg, on 20 April 2013 - 09:01 AM, said:
        Many thanks for the guide.



        My VXR surrounds have arrived and it looks like I will have to remove the model badge in order to fit them. I note that this can be done with hot water.

        If however I used a hair dryer to remove the badges would I be able to stick them straight back on again (lower down) or would I have to use some fresh adhesive? If so what?



        Thanks Dave

        bump

        Comment