Announcement

Collapse
No announcement yet.

M-tec brakes

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • M-tec brakes

    Anyone tried M-tec sport brakes any good

  • #2
    Noisy mate
    https://insignia-drivers.uk/filedata/fetch?filedataid=7610&sigpic=1

    Comment


    • #3
      As above...especially the drilled and grooved,.....the drilled only are less noisy
      ​2015 Sri vx line nav BiTurbo . Sri heated leather.5500k AFL . Vx line 20s,8inch LCD dash .FLEXride.Reverse cam.Irmscher grill.235hp and 480 torqs.30mm lowering springs.20mm H&R spacers all round. Mtec drilled discs on rear,VXR 355mm drilled on front,with Brembo 4 pot calipers. Auto wipers .VX puddle lights.Carbon effect black roof wrap.Irmscher roof spoiler.Irmscher side skirts.

      Comment


      • #4
        Originally posted by RBH View Post
        Noisy mate
        What do you recommend pal ?? i am going to do them myself so trying to save a bit of money thanks in advance .

        Comment


        • #5
          Originally posted by exclusiv. View Post
          As above...especially the drilled and grooved,.....the drilled only are less noisy
          Yep....had them on mine and my Vectra before that....they look good when new, but noisy......feck that.
          Back to good old normal discs.

          Like night and day.
          https://insignia-drivers.uk/filedata/fetch?filedataid=7610&sigpic=1

          Comment


          • #6
            Originally posted by Inmyeyes7 View Post
            What do you recommend pal ?? i am going to do them myself so trying to save a bit of money thanks in advance .
            Normal discs mate.

            Or if you want the look, drilled only as Dave stated above
            https://insignia-drivers.uk/filedata/fetch?filedataid=7610&sigpic=1

            Comment


            • #7
              Originally posted by RBH View Post

              Normal discs mate.

              Or if you want the look, drilled only as Dave stated above
              Normal disc are fine with me just seen the set front and rear with pads 173 on ebay thought it was good also seen some at 113 but they are a bit cheap ehh

              Comment


              • #8
                https://www.ebay.co.uk/itm/FOR-VAUXH....m46890.l49286
                All the sets gotta confirm to British standards buddy
                https://insignia-drivers.uk/filedata/fetch?filedataid=7610&sigpic=1

                Comment


                • #9
                  When I changed mine I thought about M-Tec,but decided for std.
                  Insignia Elite 16T,Royal Blue non Nav. + added,
                  Heko Wind Deflectors,Alloy Pedal Covers.Led full Interior,Polished Alloy Door Pins,Osram Diadem Opel Rear indicator Bulbs,Led Reverse Light Upgrade,Gear Surround Red Leds,Led reg plate lights,Nighteye Fog lamp Bulbs,Osram Night Breaker Laser Cornering Bulbs,Rear Sunblinds,Nextbase 522GW front/rear window cam,upgraded front speakers,SS Exhaust,6000k Xenon Bulbs,Thinkdiag Diagnostic Tool

                  Comment


                  • #10
                    Originally posted by Howy View Post
                    When I changed mine I thought about M-Tec,but decided for std.
                    Good call.
                    They look great at the very start, then through time, the vent holes get blocked and the grooves just disappear
                    https://insignia-drivers.uk/filedata/fetch?filedataid=7610&sigpic=1

                    Comment


                    • #11
                      Originally posted by RBH View Post
                      https://www.ebay.co.uk/itm/FOR-VAUXH....m46890.l49286
                      All the sets gotta confirm to British standards buddy
                      I thought that would be cheap rubbish just like the Eitcher on ECP just seen a full set of pads and discs for 165 Brembo ones .
                      Again thanks for the advice lads

                      Comment


                      • #12
                        Originally posted by Inmyeyes7 View Post

                        I thought that would be cheap rubbish just like the Eitcher on ECP just seen a full set of pads and discs for 165 Brembo ones .
                        Again thanks for the advice lads
                        Brembo.....nice

                        Anytime bud
                        https://insignia-drivers.uk/filedata/fetch?filedataid=7610&sigpic=1

                        Comment


                        • #13
                          I had them on before and they performed well I just had the drilled. I changed in the end when the fronts warped.

                          Sent from my Redmi Note 8T using Tapatalk

                          Comment


                          • #14
                            Had them on one of my cars , no truble .
                            and still have a brand new set in my Snead .
                            I think Lizard is running MTEC on his VXR or atleast he was looking .


                            .K.M.P.C.U
                            YEEEEEEEEHAAAAAAAAA

                            Comment


                            • #15
                              I had m-tec drilled and grooved on my previous bmw 5 series (because i wasnt willing to pay 500 quid for genuine discs and pads) and they performed well. I didnt notice any noise from them. I used Pagid pads with them.

                              Comment

                              Working...
                              X