Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
not sure if its that hard.. I mean I selected realtime informations -> add display -> and from the list LTFT a STFT ... all of them but non shows anything... just no data...
-
Yea...
But I'm not sure why I'm not getting any values in Torque Pro......1 Photo
Leave a comment:
-
Don't worry without proper diagnostic no other investment... Thank you...
Leave a comment:
-
Here is video from engine bay ... https://photos.app.goo.gl/PAAG83SM3GwVijaP8
We tried Launch diagnostic tool but we were unable to find fuel trims... just pressures etc...
I will try local Opel one more time......
Leave a comment:
-
The light line on the picture is from the Bosch diagnostic tool where it shows how the presure should be... the bold line is current presure... from the valve......
Leave a comment:
-
Yes, the car where changed injectors, pressure valve and sensor was Bosch Diesel service center......
Leave a comment:
-
thank you, Ive tried Torque PRO but no reading there... But from the fuel presure grapth I send before, there is more fuel presure then there should in the situation where the revs bumps... so more fuel?
Leave a comment:
-
yea they told me "we did not find anything wrong" ... I told them, did you try it with warm engine and they said, no... with coldso I lost trust to them .......
Leave a comment:
-
Hello,
thank you, I asked one garage, they told me that they do not know what fuel trims are...
Im trying with the second one...
I was trying myself but Im not able in torque to get these values...
Opl Monitor also dont have this or I dont know how to set PID to...
Leave a comment:
-
ye thats what I though... but I dont have anything how to make the hole for the pipe air seal... and also .. someone told me that if the membrane failed and you keep the pipe open its like to he oil cap open... so not good......
Leave a comment:
-
Hello,
is it possible that the failed membrane is reason for my problem with rev bounce during return after rev??
Jan
Leave a comment:
-
Hello, so we tested air leak but nothing... No leak ...
so I don't know ... Only thing we found that there is oil coming from this pipe... So probably the oil separator membrane failed?...
Leave a comment:
-
Insignia B 2019 - some how to videos
Hello,
during my ownership of Insignia B 2019 D20DTH engine I created some how to videos -
https://www.youtube.com/playlist?lis...XqDRtR3HHaVsIs
Hope it helps !have a great year guys !...
- Likes 5
-
Ok on friday I am booked for air leak test at local garrage... will let you know... thank you one more time for that idea
- Likes 1
Leave a comment:
-
thank you, that's actually good idea ! My boost pipe went off .. so it was changed at dealers, not sure if the problem started after this... I will check for air leak... just have to find someone with the smoke generator......
Leave a comment:
-
Yes... because I do not know what to do next...two shops and one changed 5 things and nothing... second told me "we dont know" bye ....
Leave a comment:
-
Hello, it looks like my battery is bad... Is it possible that it can be cause of this?
Pictures from battery tester - https://photos.app.goo.gl/zRLpLkQaU7WDuuLi6
thank you
Leave a comment:
-
Hello,
video of MAF - https://photos.app.goo.gl/4H51XSP5x4RimSdv9
also picture from yesterday test where the shop change the valve on high presure pump but it didnt helped...
Picture - https://photos.app.goo.gl/PXSe1rbFA2oFbvpa9
Jan1 Photo
Leave a comment:
-
One line Is expected and second is current pressure ...
Ok will check the MAF
Thank you...
Leave a comment:
-
Yea, I asked them and they told me yes it stopped but now after I told them that's it same, they told that it was same after the change...
Leave a comment:
No activity results to display
Show More
Leave a comment: