I'm far from an expert but nothing like that I could see wiring runs straight into the VAUxhall tow module. From my reading it is can bus sending a pulse to check lights are working a d due to led very low resistance it can't detect. Presumably models newer won't be affected as many use led lights and...

Thanks what year is yours mine is 2010 and has halogen lights. Was fitted when I bought all appears to be gm type socket and ibto the vauxhall bypass relay for parking sensors etc. Nothing jumped out and earth looked clean to me. Also works perfect with halogen lights. Cheers...

Thanks lizard end of the month haha...

Thanks lizard so the trailer isn't mine it's my driving instructors so any modification I do will have to be to the wiring of my car not the trailer. Is the modulator able to go into the car? I'm thinking of just getting magnetic halogen lights for the trailer test as it's easiest and cheapest fix...

Hi all

When I bought Insignia it had tow bar fitted I've towed small trailer with halogen bulbs no problem but tried a trailer with led lights and was getting lights flickering even when car was off.

I've read a lot online about Canbus and led lights doing this but when I phoned...

Cheers I've had the headlight out so that part should be OK I just didn't think to actually separate the lens and do that!

Great job gizzard I'm gonna try rhat when I get the time for sure ! I didn't know it separated like that I had just been whacking silicone over the seam haha

Thanks lizzard t will maybe give rhat a go and see how I get on for time being I have shoved some silica gel pouches in

Hi everyone

So I have insignia a pre face-lift.

I had water in headlight more than what manual suggests would be normal. I normally wouldn't care but I have my trailer test coming up(hasn't been scrapped in NI) and wana make sure car is in good order.

I dried...

Hi all

I've had mine a few years and went to buy all software for the year its usually like 100 quid but this year can't see an option for this but only to buy individual manufacturer software.

Has anyone else bought all software recently or has this package been done away...

Update

Today I stuck a new oem sensor in after getting a rag and screwdriver and gently cleaned the bearing pick up ring. Light is off for now so fingers crossed although last time took a day or two two come back. Used electrical tape and a trick I found on YouTube with three zip ties to...

Thanks lizzard will try tape first and see how I go, will pick up new sensor and stick it in tomorrow too. Cheers

Got looking at this today and still don't see anything obvious. Will have to order some multimeter leads and start reading continuity up to module. Will also throw a sensor in it. Just have a bad feeling its the bearing. One question the tabs on the female connector are broken and i cant find a part...

Haha well I'm certainly not on the ball often so I will take it

Thanks rbh does the insignia a have the abs ring on cv joint? I thought it was encoded into rear of wheel bearing. ? One thing I did wonder is there wS no washer on end of driveshaft so I was wondering if there wasn't meant to be and it had scrubbed away at the magnetic pick up. Will be able to tell...