Hi All,
i bought a used Insignia and it had TPMS showing dashes on the car dashboard. I bought 4x compatible with my car the TPMS sensors and had them replaced on Wednesday by my local garage. I also had a reset/relearn tool EL-50448 to do the work.
But for some reason, my...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
51 results in 0.0084 seconds.
Keywords
Members
Tags
-
Insignia TPMS showing dashes on the dashboard still after replacing all 4 sensors
-
Tyre sealant and tpms
I have a slow leak. Is sticking a can of tyre goo in going to do something bad to the tpms sensor?
-
TPMS Valve
Hi
I have a iffy valve on the front of my MY2011 that I would like to replace.
can anyone advise what type I need.
I know the monitor is a dark orangey thing but I don't know if just the valve can be changed out or not.
please plan is to look when I get the rear tyres...
-
Tpms
I recently had a problem with my tpms system I replaced the box behind the dash cluster & everything works great the box controls the tpms signals and the central locking system.
I thought i would post just incase anyone else has the same problem. 👍
-
TPMS Problem
Hi guys wondering if you can give me some advice.
I’ve got a 64 plate Insignia SRI and I’ve recently replaced the standard 18s with aftermarket 20s about 6 months ago with TPMS sensors fitted from the supplier. At the start all sensors worked most of the time but now and again the drivers...
-
TPMS Alloy Swap?
Hello. I have a 14 plate insignia SRi however have changed my 18" alloys to the 19" VX-Line ones can i just swap the tyre pressure sensors from the old ones onto my new ones also will they need calibrated to the car? Complete noob here so go easy
-
TPMS and central locking help
New to this site. 2015 Insignia 2.0d.
I'm looking for some advice on TPMS and central locking.
TPMS is not reading on display, all 4 tyres read --, and TPMS error message and light constantly on.
Tried relearn with my relearn tool and tpms in learn mode.
Eventually gave in...
-
TPMS General Question
Hi Guys
Recently I had to replace the 245x45x18 Rear Tyres on my 2016 Siggy Design Nav, which was done by local Tyrespot
at the time and I asked if they could put on the Front to replace the part worn ones, the guy explained it
might upset the system as they are each linked...
-
TPMS Fault on Dash
Hi All,
I recently purchased a 65 plate insigina 2l sport tourer from a local used car showroom. After picking up the car a few days later, the drive felt very harsh. Playing with the info management system I found the TPMS feature and seen the fronts wear 41 psi and the rears 44 psi. This...
-
TPMS and psi readings.
It's been 400 miles since the new tyres went on and TBH, had this issue before they were fitted.
I've set the tyres to 34psi all round and have used two digital gauges to check the pressures. Currently, the TPMS is showing 39psi all round and this info in turn is sent to OnStar. FWIW, the...
-
Tpms sensors
as the title goes....looking for a set.
Not wanting to pay crazy cash and yes, I've been on fleabay and other places.
-
New rubber and TPMS
Getting four new tyres 2mrw. Looking at the TPMS re-learn process in the owners manual, came across this paragraph:
"Each time the tyres are replaced tyre pressure monitoring system sensors must be dismounted and serviced. For the screwed sensor replace valve core and sealing ring,...
-
Tpms
just put the atomics back on the car and the TPMS pressures isn't showing on the screen.
any ideas???
ive sorted the tyre pressure, let the car sit etc....drove to Edinburgh and back and still nothing.
-
TPMS and cold weather
good morning everyone,
My elite seems not to like cold weather, or at least the TPMS doesn't...
Everytime I start the car in cold weather it seems to think the tyres are flat until I've done a couple of miles...
Anyone else encountered this.....thanks in...
-
TPMS valve stem snapped
Hi all.
Went to put air into my tire this morning.
Attempted to unscrew the valve covers in which I managed to get 3 / 4 off. Decided to leave the air filling and went to work.
At home I tried to remove it with some plyers.
On twisting the stem...