VX trim fitting need help

[exclusiv.]

Another time mate enjoy USA!! [emoji106][emoji4]


2014 Insignia Facelift, 2.0 CDTI, Ecoflex S/S

geography not your strongest strength then

[Jordaninsignia14]

I thought Vancouver was in America [emoji23]?


2014 Insignia Facelift, 2.0 CDTI, Ecoflex S/S

[exclusiv.]

Nearly......its in Canada

[RBH]

I thought Vancouver was in America [emoji23]?


2014 Insignia Facelift, 2.0 CDTI, Ecoflex S/S

If you look on a world atlas, it's about an inch from America

[Jordaninsignia14]

I was close enough then [emoji23]


2014 Insignia Facelift, 2.0 CDTI, Ecoflex S/S

[Jasper]

PART NUMBERS

L/H - 903500003...….other numbers on it are 551004542 & 13280418
R/H - 903500004......other numbers on it are 551004542 & 13280419





Hopefully the pic will show you that either side has a locating pin on it

Awsome, just what I was looking for. Thanks RBH

Would these part numbers be the same for the pre facelift rear vx line trim same as the front ?
My local Vauxhall wasn't able to help me unless I had a reg number.

[RBH]

Awsome, just what I was looking for. Thanks RBH

Would these part numbers be the same for the pre facelift rear vx line trim same as the front ?
My local Vauxhall wasn't able to help me unless I had a reg number.

Tbh buddy....I couldn't tell you.
It's quite possible but it's also possible vx changed everything just to play silly buggers with people .

[Jasper]

No worries. I'll return to Vauxhall tomorrow armed with these numbers at least Im a step closer to obtaining them.

[Jordaninsignia14]

I just ended up tiger sealing them on mate, and bought some little grommets for the holes, had no trouble


14 Facelift ecoflex, 2.0 CDTI 190, Nav, S/S

[Weccu]

I must lift this one up alive and ask if there's anyone who could give me measures of those brackets? It appears that those are worth more than gold in same weight here in my country (about 30£/piece) and no luck on scrapyards.
I have opc-line front lip at the painter atm and these (or diy-versions) would be nice to have when installing it...

[PeteH]

Or you could resort to lizzard-t 's solution and use 3" screws

[Weccu]

Or you could resort to lizzard-t 's solution and use 3" screws

That's true, but because in winter we have pretty much snow, slush and water and it gets really cold. That's why I would prefer not to leave any unnecessary gaps where that snow/slush could go and then freeze up. And we all know what happens to water when it freezes...

[lizzard-t]

Yes 3" screws and for good measure some" no nails " .and to make the job perfect .run a bead of decorators calk round it . and job done .hay presto!!!! Your on to a winner

[MattG]

That's true, but because in winter we have pretty much snow, slush and water and it gets really cold. That's why I would prefer not to leave any unnecessary gaps where that snow/slush could go and then freeze up. And we all know what happens to water when it freezes...

Yeah people will pinch it for their drinks [emoji3526]

[lizzard-t]

Martini and a slice anytime any place any where ! There a wonderful drink you can share da da da dooom de dooom !