Alloys

[Scotty]

What alloys you looking to put on?

[Scotty]

Very nice wheels. If it were me I'd try and stay as close to OME sizes as possible.

[Scotty]

Personally I'd go with the 8.5s all round. Poorboys do a great sealant. As for cleaning them, you can beat Bilberry Alloy Cleaner. Ive just finished mine and I bought it 18 months ago.

[Mo_miah]

These will give you 17mm less clearance on the inside and extend about 21mm. Full lock your wheel and see how much clearance you have. Then measure from the inside of the wheel arch to the wheel face to see if the wheels will rub on the arches when dropped

[Mo_miah]

Thats assuming you have oem 18" 8j et42 alloys on atm

[Mo_miah]

Personally i think they will fit fine

[Scotty]

Most Gtechniq products are very good.

[Mo_miah]

9.5j with a slight stretch on the tyres will look good. And defo 9.5j all round

[Mo_miah]

245/45R18 is for the oem 8j wheel so on a 9.5j wheel you'll get 3/4" stretch either side. Any more and it will affect your handling too much. 245mm is the bare minimum you should go on a 9.5j wheel