Announcement

Collapse
No announcement yet.

Fitting Irmscher Grill

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Fitting Irmscher Grill

    Good day people,

    I want to fit a Irmscher grill but on the manual from Irmscher it says I have to actually saw my grill out. So before I buy, is this the case? And if so, what would be the best how to?

    Thanks.

    Ps I already have my DRL light so wanted to do it all in once because the bumper has to come off.

  • #2
    Yep i had to do it many moons ago for my Irmy grille. I used a hack saw but an electric saw would have been much easier . once you have cut the oem grille out the irmy grille comes with the black sticky stuff use gloves when u apply it as its hell to remove off your hands. So u then bond the irmy grille to the oem template and have to leave it in a well aired room for about 12 hours for it to set hard. Then fit it back on your bumper.

    Comment


    • #3
      Bought mine already done
      ​2015 Sri vx line nav BiTurbo . Sri heated leather.5500k AFL . Vx line 20s,8inch LCD dash .FLEXride.Reverse cam.Irmscher grill.235hp and 480 torqs.30mm lowering springs.20mm H&R spacers all round. Mtec drilled discs on rear,VXR 355mm drilled on front,with Brembo 4 pot calipers. Auto wipers .VX puddle lights.Carbon effect black roof wrap.Irmscher roof spoiler.Irmscher side skirts.

      Comment


      • #4
        Originally posted by exclusiv. View Post
        Bought mine already done
        Good idea that, sounds like a right pain to do

        Comment


        • #5
          Thanks for the tips. Sounds like a job for the weekend, beginning on Friday night....

          Comment


          • #6
            Exclusiv, btw. Was this a lucky sell or is there a website who sells these ready to go?

            Comment


            • #7
              No ,I bought it from a friend,who did all the hard work when he bought it new
              ​2015 Sri vx line nav BiTurbo . Sri heated leather.5500k AFL . Vx line 20s,8inch LCD dash .FLEXride.Reverse cam.Irmscher grill.235hp and 480 torqs.30mm lowering springs.20mm H&R spacers all round. Mtec drilled discs on rear,VXR 355mm drilled on front,with Brembo 4 pot calipers. Auto wipers .VX puddle lights.Carbon effect black roof wrap.Irmscher roof spoiler.Irmscher side skirts.

              Comment


              • #8
                Allright thanks

                Comment


                • #9
                  Little teaser
                  ​2015 Sri vx line nav BiTurbo . Sri heated leather.5500k AFL . Vx line 20s,8inch LCD dash .FLEXride.Reverse cam.Irmscher grill.235hp and 480 torqs.30mm lowering springs.20mm H&R spacers all round. Mtec drilled discs on rear,VXR 355mm drilled on front,with Brembo 4 pot calipers. Auto wipers .VX puddle lights.Carbon effect black roof wrap.Irmscher roof spoiler.Irmscher side skirts.

                  Comment


                  • #10
                    Aaaargghhhhh.....!!!!

                    Comment


                    • #11
                      That looks really nice
                      I just got my new grill
                      Will this need cut or is this a full replacement for existing , have been naughty and not actually checked what's involved just bought it haha



                      Comment


                      • #12
                        That's full replacement. It will just clip in. As far as I am aware it's only irmy one that needs cutting.


                        sigpic

                        Comment


                        • #13
                          Perfect cheers again mate , dunno if I'm missing something but on that how to just appears to be comments can't see any guide on it


                          Comment


                          • #14
                            Yeah that's the bit that didn't carry over unfortunately. But comments how to do it is there.

                            6 torx screws across slam panel. 3 in each wheel arch.
                            1 other torx screw under car near passenger wheel.
                            2 bolts under car in sub frame.
                            Then there are 4 plastic push rivets under car as well that attach to the under tray.




                            sigpic

                            Comment


                            • #15
                              Perfect cheers away to give it a bash


                              Comment

                              Working...
                              X