Announcement

Collapse
No announcement yet.

Footrest fitted

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Originally posted by sriray View Post
    i got the wiring and switches but not sure where to tap into on fuse box and the seat base as there is 4 colour wires.
    are they aftermarket ones?

    Comment


    • #32
      Yes
      So for each pad wire on the aftermarket loom you have +&- for each pad.
      The front original seat base has 4 wires.

      Comment


      • #33
        THESE THE KITS I HAVE.....


        THE ONES WITH THE WIRING ARE THE REARS ( STILL TO BE DONE ) THESE ARE JUST ROCKER SWITCHES

        EXACTLY THE SAME KIT AS I FITTED TO MY VECTRA C LEATHER REAR SEATS.

        Comment


        • #34
          this is the switches in place for the fronts.

          I picked these ones as I thought they looked kinda oem


          Comment


          • #35



            and while I had it out, I also done this.......

            Comment


            • #36
              I agree they look like nipples, I MEAN OEM! I like the red LEDs, it's time Vauxhall fitted them.

              Comment


              • #37
                Originally posted by Red Stoat View Post
                I agree they look like nipples, I MEAN OEM! I like the red LEDs, it's time Vauxhall fitted them.
                They look a bit better than the cheap toggle switches that most aftermarket ones are supplied with

                Comment


                • #38
                  Originally posted by RBH View Post
                  this is the switches in place for the fronts.

                  I picked these ones as I thought they looked kinda oem

                  The switches do look nice. How did you wire do to the fusebox and front car seat

                  Comment


                  • #39
                    Originally posted by sriray View Post
                    The switches do look nice. How did you wire do to the fusebox and front car seat
                    Not done the seats yet....that's the job for this weekend.
                    I put a piggyback into the fuse box.

                    I used a circuit tester to find an ignition live.
                    I'm sure it was number 6

                    Comment


                    • #40
                      I'm not sure if you need a separate line just for the heated seats. They draw out some wattage? I never done it before, so just asking

                      Comment


                      • #41
                        Originally posted by sriray View Post
                        I'm not sure if you need a separate line just for the heated seats. They draw out some wattage? I never done it before, so just asking
                        I fitted them to my rear vectra leather.
                        All I done was took a spur the rear cigar lighter.

                        No one bit of problem with them that way either.

                        Comment


                        • #42
                          Originally posted by RBH View Post
                          I fitted them to my rear vectra leather.
                          All I done was took a spur the rear cigar lighter.

                          No one bit of problem with them that way either.
                          Ok is just what I read. So just cautious.

                          Comment


                          • #43
                            Originally posted by sriray View Post
                            Ok is just what I read. So just cautious.
                            I'd never fitted them before my vectra so I was going in blind.
                            I had posted up on the vectra c forum and got zero response.

                            So I bit the bullet and fitted them.
                            Took me an afternoon to do the full rear seat....and was absolutely delighted with the outcome.

                            I then done my son's half leather vxr seats in his Astra.

                            Hence the reason I got the same ones for the Insignia

                            Comment


                            • #44
                              I had a look at aftermarket heated seat loom but they aren't interesting unlike yours. So I ended up getting the toggle switch one. Brought it before Christmas not got round to fitting it.

                              Do you have a link for yours?

                              Comment


                              • #45
                                Originally posted by sriray View Post
                                I had a look at aftermarket heated seat loom but they aren't interesting unlike yours. So I ended up getting the toggle switch one. Brought it before Christmas not got round to fitting it.

                                Do you have a link for yours?
                                Here you go buddy

                                Comment

                                Working...
                                X