Announcement

Collapse
No announcement yet.

Gear change issues *advice needed*

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Gear change issues *advice needed*

    Hey guys im new here hope your all good
    My 2011 1.8manual insignia has developed a strange fault, my gear change has become quite difficult, it no longer smoothly goes into each gear, the gear stick seems to be 'sticky' and find myself putting more force than usual on the gearstick to get it into gear.
    Also, strangely, this is an intermittent problem, the beggining of last week i first noticed the problem, then a few days later it was back to normal, now the problem is back.
    Any idea's??

    Thanks
    Chris

  • #2
    I would get the cable linkages checked over,may want some adjustments, welcome to the forum btw
    ​2015 Sri vx line nav BiTurbo . Sri heated leather.5500k AFL . Vx line 20s,8inch LCD dash .FLEXride.Reverse cam.Irmscher grill.235hp and 480 torqs.30mm lowering springs.20mm H&R spacers all round. Mtec drilled discs on rear,VXR 355mm drilled on front,with Brembo 4 pot calipers. Auto wipers .VX puddle lights.Carbon effect black roof wrap.Irmscher roof spoiler.Irmscher side skirts.

    Comment


    • #3
      As said check cable adjustment.maybe a ggearbox oil change will do some good,a few members have done this inc me and made the gear change better.
      Insignia Elite 16T,Royal Blue non Nav. + added,
      Heko Wind Deflectors,Alloy Pedal Covers.Led full Interior,Polished Alloy Door Pins,Osram Diadem Opel Rear indicator Bulbs,Led Reverse Light Upgrade,Gear Surround Red Leds,Led reg plate lights,Nighteye Fog lamp Bulbs,Osram Night Breaker Laser Cornering Bulbs,Rear Sunblinds,Nextbase 522GW front/rear window cam,upgraded front speakers,SS Exhaust,6000k Xenon Bulbs,Thinkdiag Diagnostic Tool

      Comment

      Working...
      X