Where do people recommend for sourcing for the vx-line facelift (2013 onwards) front / rear inserts and side skirts? Seems loads about on Ebay or companies like Autovaux for pre-facelift only!!
Announcement
Collapse
No announcement yet.
VX-Line Kit Facelift
Collapse
X
-
Side skirts are the same for pre facelift and facelift the front and rear splitters are different though.
Plenty used on eBay although the sides are hard to come by.
Fibreglass side skirts are available but need a bit of work to fit as far as I could see when I was searching.
-
Thanks for that.
I've bought a geniuine front bumper valance from Ebay but it doesn't seem to be the correct fitting. The fixing points don't fit... see the photo below. Basically the inner wheel arch plastics do not sit flush with the bumper itself. I have a 63 plate facelift and when I've checked newer Insignias, this does sit flush and the valance sits flush against the inner wheel arch. Meaning I don't think this fits unless someone else has tried and come up with a different idea?
[FONT=Franklin Gothic Medium][SIZE=2][B]// Harwood[/B][/SIZE]
[SIZE=2][B]2013 CDTI Ecoflex Design 140[/B][/SIZE][/FONT]
Comment
-
I've checked and no damage, looks like it's designed that way. Checked an SRI preface with no kit and that wasn't flush either! Stumped!!Originally posted by Mr Wullie View PostThe inner wing guard (plastic part) should sit flush with the bumper. Is it the same both sides? I wonder if something has broken off where the shield attaches to the bumper part.[FONT=Franklin Gothic Medium][SIZE=2][B]// Harwood[/B][/SIZE]
[SIZE=2][B]2013 CDTI Ecoflex Design 140[/B][/SIZE][/FONT]
Comment
-
That picture isnt very clear, however i believe if what i am seeing is correct is that your car would have a plastic bracket that fits between the wheel arch and the skirt.
you can just make it out on this picture
https://www.flickr.com/photos/153095...7683990020644/
Comment
-
Originally posted by Spark View PostThat picture isnt very clear, however i believe if what i am seeing is correct is that your car would have a plastic bracket that fits between the wheel arch and the skirt.
you can just make it out on this picture
https://www.flickr.com/photos/153095...7683990020644/[FONT=Franklin Gothic Medium][SIZE=2][B]// Harwood[/B][/SIZE]
[SIZE=2][B]2013 CDTI Ecoflex Design 140[/B][/SIZE][/FONT]
Comment
-
Originally posted by Spark View PostNo problem.
You might not be able to get the parts though, but as long as you use a long enough screw it will fit fine pal[FONT=Franklin Gothic Medium][SIZE=2][B]// Harwood[/B][/SIZE]
[SIZE=2][B]2013 CDTI Ecoflex Design 140[/B][/SIZE][/FONT]
Comment
-
Originally posted by Spark View PostHarwood are you the chap who brought them parts from up sheffield way?[FONT=Franklin Gothic Medium][SIZE=2][B]// Harwood[/B][/SIZE]
[SIZE=2][B]2013 CDTI Ecoflex Design 140[/B][/SIZE][/FONT]
Comment
Comment