![[ POTM WINNER ]](images/potm/potm1.png?m=1711891982)
Tweet
Anyone used a clay cloth or mit are they any good show do they compare to a clay bar
Is the process the same as using a bar
Cheers
Is the process the same as using a bar
Cheers
-
-
G3 Mit from Halfords are good,but haven't actually used a clay bar myself2015 Sri vx line nav BiTurbo . Sri heated leather.5500k AFL . Vx line 20s,8inch LCD dash .FLEXride.Reverse cam.Irmscher grill.235hp and 480 torqs.30mm lowering springs.20mm H&R spacers all round. Mtec drilled discs on rear,VXR 355mm drilled on front,with Brembo 4 pot calipers. Auto wipers .VX puddle lights.Carbon effect black roof wrap.Irmscher roof spoiler.Irmscher side skirts. -
I used the G3 mit on mine when I first got the Elite, the paint was in a sorry state,did prep the paint good,ready for polish etc.Insignia Elite 16T,Royal Blue non Nav. + added,
Heko Wind Deflectors,Alloy Pedal Covers.Led full Interior,Polished Alloy Door Pins,Osram Diadem Opel Rear indicator Bulbs,Led Reverse Light Upgrade,Gear Surround Red Leds,Led reg plate lights,Nighteye Fog lamp Bulbs,Osram Night Breaker Laser Cornering Bulbs,Rear Sunblinds,Nextbase 522GW front/rear window cam,upgraded front speakers,SS Exhaust,6000k Xenon Bulbs,Thinkdiag Diagnostic ToolComment
-
Quicker, cover more area, and small areas easier....so i have been told.Usual Elite specification;Dancing lights, up/down windows, sliding seats, on board atlas, slippery seats, musical bumpers, storm detectors, tubeless radio, female knight rider communication system, all seeing windscreen, cherry air freshener, auto moaning passengers, learner driver, shiny door pins, rear boom box, Heko smoked window hats, rear window sunglasses, 10 million candle flame reversing lights, matching number plate lights, shiny pedals, front and rear all seeing eyes, fully integrated interrogation system, empty bank account .
MATTG - 2016 - 2.0 ELITE 170Comment
-
+1 for the G3 mitt
it great and very easy to use, wash the car and rinse, make up some soapy water, use the cloth side to wet the paint and rub with the clay side until you no longer hear a scratching sound
the clay mitts are softer and kinder to the paint work but may not remove stubborn bits
for that you will need a more aggressive clar bar which most likely will need machine polishing afterwards
clay mitts can also be reused a a fair few timesComment
Comment