Announcement

Collapse
No announcement yet.

Fault code info

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Fault code info

    Hi

    anybody help with the info regarding the following fault code on a 16reg insignia A20DTH 2.0 Diesel sri S/S. Im getting the EML on the dash so put a code reader on it and have a code P11DC but cant find what this references to anybody any ideas please.

  • #2
    Similar here.

    P11DB NOx Sensor 1 Current Capacity


    Last post here: https://bit.ly/2G3E9ns

    P11DC is for second NOx sensor

    Comment


    • #3
      i cleared the code done 160 miles yesterday and its came back on after aprox 150 miles . will it be a new NOx sensor if so any ideas of cost .

      Comment


      • #4
        also thanks for quick reply

        Comment


        • #5
          To be sure you have to diagnose it.
          Make sure that there is 5v on the connector and check if wires are not damaged.
          Other than that you have to confirm that with your local garage or someone else over here.
          Not cheap, quick search on eBay but you may try at your local steelers like eurocarpart etc.
          Or used one's

          But first you need to know the correct part number you require

          Personally I would go for used one due to prices and hoping that it will be OK and last for years.

          Comment


          • #6
            It’s a NOX sensor error; to have detail knowledge about causes and solution of this error code, I would recommend you to read this blog https://xenons4u.co.uk/blog/p229f62-...des-explained/

            Comment

            Working...
            X