Hi my perfect bunch currently got a bust 160 eco flex 60 plate needs a new engine iv had 1 sent out to me but it’s not a eco flex one and it doesn’t have pressure sensor glow plugs like my bust engine does any 1 still know if it’s a straight swop
Announcement
Collapse
No announcement yet.
Engine swop
Collapse
X
-
Can't help with your question, sorry, however being a sunny Easter holiday weekend, there's a fair chance folk are busy doing other family type stuff and not sitting stuck to a forum all day.
Give folk a chance, I'm sure they'll help if and when they can.
Comment
-
plus along with what was said above,not everyone who owns an insignia has performed an engine swap,so answers will be slow to come ,if at all2015 Sri vx line nav BiTurbo . Sri heated leather.5500k AFL . Vx line 20s,8inch LCD dash .FLEXride.Reverse cam.Irmscher grill.235hp and 480 torqs.30mm lowering springs.20mm H&R spacers all round. Mtec drilled discs on rear,VXR 355mm drilled on front,with Brembo 4 pot calipers. Auto wipers .VX puddle lights.Carbon effect black roof wrap.Irmscher roof spoiler.Irmscher side skirts.
Comment
-
Engine swop
Compare the 2 together I suspect you’ll have to swap over the glow plugs and associated wiring connections etc from one to the other.
The engine will be the same but maybe subtle differences between the 2 variants need to compare and see.
Remember to come back and let us all know as it may help others who have to do the same.
I guess oil seal failure is the reason for change?
Comment
-
I’d guess that the ecu would have to be reprogrammed cause it would probably keep going into limp mode due to the wrong glow plugs. Wether or not you can fit the engine and change the plugs is another question
Comment
-
Hi could anybody help.
Engine seized on 11 plate 2.0 160 cdti i have replaced with the same engine from an 09 plate.
Everything seems to be in place have fired it up sounds sweet just cant get it to crank on the key any ideas?
Comment
Comment