HELLO EVERYONE ,
Firstly I’d like to say thanks for having me I’m new .. I suffer with dyslexia So my punctuation and spelling might be abit off so apologies in advance.
I serviced my 2010 Insignia @ 78000 just last mouth in fact .
Just before I serviced it I was getting a service vehicle soon light displayed on the dash . I’m having a problem occasionally when giving it big bananas it goes into a limp mode and losses power then it picks up !!
My service I changed oil all the filters glow plugs so in my eyes it had a good amount done . I do about 26k a year driving so I make sure it’s well looked after .
I was getting frustrated with the service vehicle soon light coming on so I bought a “Autel MaxiDiag Elite MD802 Full System OBD2 Scanner Code Reader with Live Data, Oil Service Reset, EPB Multifunctional Scan Tool” as I would be doing the rear brakes soon I though best have someone that was bit better than the DIY job .
Plugged it in and on the occasion when I get the loss in power it stores a code
I get this code p2282 mass air flow sensor performance.
I looked into what it could be at if people said inter cooler pipe . The inter cooler pipe isn’t split I had removed it and inspected it .. the was a film of oil on the pipe which I have clean and I’m monitoring.
Also I’m getting glow plug 3/4 low voltage.. I have replaced the glow plug mod with a genuine Vauxhall part . Still I’m getting the code come up ..
Sorry if I’m waffling I’m not a mechanic just at a loss and help or suggestions welcome ..
Paul
Firstly I’d like to say thanks for having me I’m new .. I suffer with dyslexia So my punctuation and spelling might be abit off so apologies in advance.
I serviced my 2010 Insignia @ 78000 just last mouth in fact .
Just before I serviced it I was getting a service vehicle soon light displayed on the dash . I’m having a problem occasionally when giving it big bananas it goes into a limp mode and losses power then it picks up !!
My service I changed oil all the filters glow plugs so in my eyes it had a good amount done . I do about 26k a year driving so I make sure it’s well looked after .
I was getting frustrated with the service vehicle soon light coming on so I bought a “Autel MaxiDiag Elite MD802 Full System OBD2 Scanner Code Reader with Live Data, Oil Service Reset, EPB Multifunctional Scan Tool” as I would be doing the rear brakes soon I though best have someone that was bit better than the DIY job .
Plugged it in and on the occasion when I get the loss in power it stores a code
I get this code p2282 mass air flow sensor performance.
I looked into what it could be at if people said inter cooler pipe . The inter cooler pipe isn’t split I had removed it and inspected it .. the was a film of oil on the pipe which I have clean and I’m monitoring.
Also I’m getting glow plug 3/4 low voltage.. I have replaced the glow plug mod with a genuine Vauxhall part . Still I’m getting the code come up ..
Sorry if I’m waffling I’m not a mechanic just at a loss and help or suggestions welcome ..
Paul
Comment