Announcement

Collapse
No announcement yet.

removed and replaced fuses now car wont start

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Have you tried the other key if you have one ?
    Is it manual transmission?


    .K.M.P.C.U
    YEEEEEEEEHAAAAAAAAA

    Comment


    • #17
      now you mention it i had a message pop up about the afl lights thats why i started looking at the lights in the first place pal. yeah i no i thought at least one would pop up but nothing at all maybe as i have had the battery off that many times trying to reset the full system?? going to try a multi meter on every fuse in the morning and see if there is a smallest chance something is wrong with them before getting a new BCM.

      Comment


      • #18
        Probably that 20 amp fuse you pulled.

        If you could try get opcom on the car as a last resort it's a vauxhall specialist diagnostic obd tool.

        It should also tell you what's wrong with the lights too.

        Comment


        • #19
          no spare key lizzard may get one cut without the transponder just get the actual key cut and try that as well. also it is a 2.0lt cdti elite nav 6 speed manual pal.

          Comment


          • #20
            If you get another BCM then certain modules will have to be programmed to it .


            .K.M.P.C.U
            YEEEEEEEEHAAAAAAAAA

            Comment


            • #21
              i see would it do yo no roughly if that is an expensive job?

              Comment


              • #22
                the penny has just dropped as well that the lights i thought were for nothing are my afl bulbs so should never of bloody touched the fuses

                Comment


                • #23
                  You can buy opcom for around £35 quid.

                  Comment


                  • #24
                    Did you check the fuse for theft deterrent system in the boot fuse box. F22?

                    Comment


                    • #25
                      Have you tried locking and unlocking the car with the remote ?
                      Next thing would be to check powers and grounds .
                      See if you have power to starter .


                      .K.M.P.C.U
                      YEEEEEEEEHAAAAAAAAA

                      Comment


                      • #26
                        yeah i have tried everything with the key pal thinking it was the immobilizer transponder and receiver going to run a multi meter on all the the fuses just to see if there is the slightest and smallest thing that my eye cant see and hopefully replacing the fuses at the start has spiked another fuse making it useless. i will get a short video now as well to show use.

                        Comment


                        • #27
                          lewish i do not have a fuse in 22 in the boot there is 5 amp in 23 then a couple of 10amps scattered around and 2 30amp bigger fuses pal.

                          Comment


                          • #28
                            Let us know how you get on testing the fuses.

                            Comment


                            • #29
                              removed and replaced some fuses now car wont start

                              Click image for larger version

Name:	20191107_102211.jpg
Views:	1
Size:	66.0 KB
ID:	243882Click image for larger version

Name:	20191107_102216.jpg
Views:	1
Size:	49.8 KB
ID:	243883Click image for larger version

Name:	20191107_102224.jpg
Views:	1
Size:	57.6 KB
ID:	243884Click image for larger version

Name:	20191107_102239.jpg
Views:	1
Size:	64.0 KB
ID:	243885Click image for larger version

Name:	20191107_102324.jpg
Views:	1
Size:	68.3 KB
ID:	243886Click image for larger version

Name:	20191107_102239.jpg
Views:	1
Size:	64.0 KB
ID:	243885Click image for larger version

Name:	20191107_102324.jpg
Views:	1
Size:	68.3 KB
ID:	243886Click image for larger version

Name:	20191107_102327.jpg
Views:	1
Size:	61.6 KB
ID:	243887

                              could not get a video to upload but got these images from start to finish. note that the engine managemant light is not on at all and the car and pad lock stay solid no flashing at all thanks guys.

                              Comment


                              • #30
                                Is your battery fully charged?
                                Your key fob has not sustained any damage at all
                                Reason why I ask is there are some situations when the car won't start and show that warning
                                1) defective battery or low battery output
                                2) transponder chip in fob has been damaged .
                                Just a thaught


                                .K.M.P.C.U
                                YEEEEEEEEHAAAAAAAAA

                                Comment

                                Working...
                                X