Announcement

Collapse
No announcement yet.

Interior light mod

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Interior light mod

    Hi Everyone

    I wanted to do this for a while now, even with LED always found that the front interior illumination is bit week compare to rear, so decided to make the read lamp come on is well when you open doors or switch manually to on, this mod allows you to achieve this also doesn't effect read lamp on by it self,

    1) you need to fully remove the light unit housing, 2 screws and there is 4 plastic tabs that you need to pull towards inwards to pull the whole assemble down( tabs a located 2x front 2x side near the windscreen end) sorry didn't take picture
    2) disconnect all connectors
    3) light unit is self have 2 metal clips that you push in and push the unit out from the black housing
    4) once you have this remove plastic light bar, this is only to illuminate your switches and is held in place via 4 retaining clips, gently pull up ( see pictures)
    5) on pictures you can see which copper plate is the signal for door opening, you have to solder bit of wire from that bar to each lamp switch ( see pictures)
    6) once you solder everything , don't forget to refit you illumination bar refit and enjoy it.

    If you have any question just ask. Let me know what you think






  • #2
    really nice wee mod buddy

    Comment


    • #3
      Lot brighter now in dark, very happy with result.

      Comment

      Working...
      X