Anti roll bar bushes

[alihijazi]

Hello got an insignia 2009
It has the front anti roll bar bushes worn-out
Is it an easy fix or I need to remove several parts to reach them?
Does anyone know the diameter of the bar?
I'm looking for powerflex ones is it this that I need to order?
PFF80-1503-26.6
Kindly advise

[RBH]

Hello got an insignia 2009
It has the front anti roll bar bushes worn-out
Is it an easy fix or I need to remove several parts to reach them?
Does anyone know the diameter of the bar?
I'm looking for powerflex ones is it this that I need to order?
PFF80-1503-26.6
Kindly advise

They'll probably be different sizes for different engines.
Stick a spanner over the bar....this will help you with the size

[alihijazi]

They'll probably be different sizes for different engines.
Stick a spanner over the bar....this will help you with the size

Are the bolts of the bushes clamp accessible or need to lower the suspension frame?

[RBH]

Are the bolts of the bushes clamp accessible or need to lower the suspension frame?

no....everything's accessible for the DIY'er buddy

[Paddy_M]

Hi,

What is a torque spec for anti roll bar links? Is it 65Nm?

[NateP]

Anybody done the front ARB bushes on a 2.0 cdti. I need to change mine but look like a nightmare to get to with a ratchet?

[Howy]

Hi,

What is a torque spec for anti roll bar links? Is it 65Nm?

50Nm or 37lbf ft
anti-rollbar to subframe 22Nm stage 1
angle tighten stage 2- 30 degrees

[lizzard-t]

They are accessible by taking the wheel off both sides ,if you cannot get a ratchet on them a good spanner and some WD 40 should get them going.