Announcement

Collapse
No announcement yet.

Insignia Estate 2009 xenon headlight adjustment

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Insignia Estate 2009 xenon headlight adjustment

    There are white plastic adjusters in the slam panel that allow you to manually adjust the beam angle, the outer ones adjust vertically, inner horizontally

  • #2
    ^^ what he said,but however before I adjusted mine,it was at vx for another issue and I asked them??to check If the light sensors which they said were ok.

    It's the plastic adjuster nearest to the wash wipe water fill,if that helps
    sigpic

    Comment


    • #3
      Logosgil, on 13 March 2014 - 09:53 PM, said:
      ^^ what he said,but however before I adjusted mine,it was at vx for another issue and I asked them??to check If the light sensors which they said were ok.

      It's the plastic adjuster nearest to the wash wipe water fill,if that helps



      Thank **** for that, thought the lsd was kicking in too early

      Comment


      • #4
        Kervaig, on 13 March 2014 - 09:56 PM, said:




        Thank **** for that, thought the lsd was kicking in too early />



        I need to come round to yours on a Thursday Nite then!!
        sigpic

        Comment


        • #5
          ahh, likey, likey -?? ?? mmm.... munchies..........

          Comment


          • #6
            Pekka,park square up to a wall,adjust the lights by counting the clicks when you turn,make sure you do the same amount on clicks both sides,mot failure happens when the lights arnt level,

            Easy,it must be cos I did it,
            sigpic

            Comment


            • #7
              Mate,I've said above,under the bonnet,look at the headlamp,thers two white plastic adjusters,it's the one next to the screen wash filler.

              And thus the same the other side,
              sigpic

              Comment


              • #8
                Pekka, on 13 March 2014 - 10:29 PM, said:
                Fourth: Where is the "SLAM" panel? Is it the panel where the bonnet lock is?



                Yes, the adjusters are slightly recessed but are quite obvious

                Comment


                • #9
                  Just make sure you do both sides the same!

                  Youl probally need to do just half a turn about 2 or 3 clicks
                  sigpic

                  Comment

                  Working...
                  X