Hi
I have the 2014 Insignia SRI Nav CDTI ECO (S/S) Engine A20DTH and I'm trying to figure out the deal with Carplay! My Insignia connects to my Iphone and says Vauxhall Insignia so I know that's OK but after that i have no idea, any help would be greatly appreciated and if someone knows if it...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
27 results in 0.0030 seconds.
Keywords
Members
Tags
-
14 plate Insignia carplay
-
Crankshaft sensor location A20DTH
H8
Can anyway tell me where the crankshaft sensor is located on the A20DTH engine please.
I've got to investigate an issue which looks like the crankshaft sensor failing fault code P1325 (kangaroo over 1.8k revs, lost acceleration and fuel mpg, & service vehicle soon message)....
-
A20DTH VS A20DTE 2015 insignia ecoflex
I’m considering changing the oil pick up seal but wondered if I need too , does anyone know the key differences with the engine after the update ?
-
A20dth or a20dtr block only?
I have rebuilt 6 of these A20DTH engines over the last couple of years, and have interchanged parts from A20DT/A20DTH/A20DTJ etc, have also used crankshafts from the Z19DTH engine as they are exactly the same cranks, but would like to know if there is any difference between the BLOCKS ONLY of the A20dth...
-
z19dth block with A20dth Head
z19dth block with A20dth Head. I have been told its possible has anyone actually done it.
I have been told you need to take the crank out and change the pickup on the crank shaft.
The head goes on without a problem.
I am wondering has anyone actually done it
...
-
Can you use a Z19DT bottom half with a A20DTH Head.
Right I brought a 2011 plate Vauxhall insignia from a auction and it looks like the car has heat seized. The pistons are stuck in the bores. Well that's what this mechanic has said. I rang up a Vauxhall specialist who is also a mobile mechanic and he has said that. He has heard that you can use a z19DT...
-
Timing belt change A20DTH
Did the timing belt on my wifes '14 Elite today. 156kms/97.5k miles
Spent half an hour wondering why I couldn't turn the engine over on the crankshaft bolt to set No.1 piston at TDC.
Then realised I'd left it in gear.
What a dumb ass.
Bearing in mind I did my own A20DTR last...
-
Bare block 2.0 cdti (A20DTH)
After a A20DTH engine block, either refurbed or can be line bored ?
-
2.0CDTI A20DTH drivers, at what RPM do you shift to 2nd gear?
Hey everyone,
I've been driving a MY2012 A20DTH for a while.
All the shifts are nice and smooth (upshifts and downshifts),
except when I'm shifting from 1st to 2nd.
I just can't get it to shift perfectly, there's always a slight jolt.
Any advice...
-
A20dth turbo oil feed pipe
I see a brand new one of a Vauxhall seller
But it says it for a20dtr
I'm doing my turbo exchange in 2 weeks getting all parts before I start
Is the dtr pipe compatible with my a20dth??
It cheap reason why I'm interested in it but it new
-
A20DTH New Engine required.
Hi guys.
I have a 2009 Estate, and have had the “dreaded” oil seal failure.
I am told by my garage that I need a new engine.
Where is the best place to find a rebuild or new? However budget as always comes in to play.
Thanks
-
Waterpump for a A20DTH
Where is the best place to to get a new water pump for a A20DTH ? dealer etc and how much i am i looking to shell out also is their a how to guide banging about as i can't find one.
Thanks
Mike
-
A20DTH radiator fans
Hi all,
Need some advice please.
I've just noticed that the right radiator fan doesn't work at all.
Left one works on both low and high speed but the right one doesn't work even when the coolant temperature is high.
I've checked fuses 42 and 45 in the engine...
-
A20dth water pump. Insignia 2.0 sri 2011 auto
A few weeks ago I got the top up coolant warning. Assumed like many others that it was the egr cooler. Sadly, it is a leaking water pump. The car had new timing belt in aug 16, about 15000 miles ago so the repair will be out of warranty.
What I'm looking to understand is whether the water pump...
-
Anyone fixed there own bottom end on a insignia 2.0 cdti a20dth engine
My bottom end has gave up the ghost like hundreds out there. I was thinking of getting the block machined, new main bearings and crankshaft ground to match.
I was wanting to no if anyone went down the cheaper route of fixing there own engine instead of all these engines getting scrapped and having...