In my opinion yes. I have used them for years and cant fault them. Remember to get the h7r bulbs not the normal h7 bulbs. Their 55w ultimate kit is what im using. Get either 5000k or 6000k. Dont go any higher
Announcement
Collapse
No announcement yet.
HID
Collapse
X
-
No glare with the h7r bulbs. Some cheaper kits are h7r but poor quality so you do get glare with those. Fitting is fairly easy. Make sure you have a drill with a circle cutter makes like so much easier. Light output is amazing. Dont need to use high beams anymore on pitch black country roads
-
I found them an absolute pig to get out and in. Ended up going to local Indy to get them fitted. Just have plasters at the ready for your knuckles and a swear box. Remember to take the neck off the water bottle on the passenger side to get some more room.
Comment
-
Scotty, on 22 January 2014 - 07:13 PM, said:
I found them an absolute pig to get out and in. Ended up going to local Indy to get them fitted. Just have plasters at the ready for your knuckles and a swear box. Remember to take the neck off the water bottle on the passenger side to get some more room.
wouldn`t be easier to take the bumper of like in the vectras ?? i guess is much easier than to destroy ur hands ...
Comment
-
Unilateral, on 23 January 2014 - 12:46 AM, said:
You also need to cut a slit in the bulb holders to get the hid bulbs wires through.
Hmmmm....didn't know I need to cut on the bulb holder...do you mean the plastic tap on the headlights ? They usually send the circular drill thingie ...I guess. On the vectra they did.
Just talked with hids4u on their Facebook page, the 55w H7R is 105 quid delivered. I bit steep, but the amount of light that you get ....will have to save ....another mod that I need to do ... Grrrrrr
Comment
-
Unilateral, on 23 January 2014 - 12:21 PM, said:
I mean the metal clip that twists over the back of the bulb to hold them in place. The hole isn't big enough to feed the wires through so you need to cut a line into it to get them through. You can buy adapted bulb holders but in my experience it's a better fit if you adapt your originals.
Ahaaaaaa.....cool....will have that in mind when I buy mine. Probably will end up with someone helping me do it as I am crap when it comes to modifying things ...
Comment
-
mmiah, on 22 January 2014 - 08:07 AM, said:
In my opinion yes. I have used them for years and cant fault them. Remember to get the h7r bulbs not the normal h7 bulbs. Their 55w ultimate kit is what im using. Get either 5000k or 6000k. Dont go any higher
I was reading somewhere that it is possible to melt the headlights, if they are 55 w. Is that true or just a mith? I was looking at a 55w kit from hids-direct, its cheaper ....
Comment
Comment